Hollywood Shellholder Bushing ?

[Earl Brasse]

On a Hollywood Senior turret press:

Where can I get the bushing to reduce the shellholder hole from shotgun size down to standard rifle/pistol?



Seems like a simple thing, but I don't have a lathe, mill etc.

[beeser]

CH4 has them and the price seems very reasonable.

Edit - Sorry Earl but I mislead you about the bushing. I was referring to the bushing that reduces the 1-1/2" hole for the dies to 7/8". Of course Tracvision has what you need and is an excellent source for it. Good guy to boot.

[LUBEDUDE]

Tracvision has OEM shell holder bushings.

[Tracvision]

Thanks Lube for the plug. I have Hollywood numbers 1,2,3,4,6, ($16) 50 BMG ($35) and the Universal shell holder adapter ( $35 or $42 with the 1/2 to 3/4 bushing) All in stock and standard USPS shipping included. I also carry many OEM parts for presses and powder measures. If your looking for a NOS Hollywood Senior Turret, I have them. And last , but not least...I have Hollywood primer stems in all lengths and sizes.

167461

[Kevin Rohrer]

If you are talking about this thing, I got it off Zamage on Ebay for $10. I believe he has a presence here. Tracvision may have them, too.

167466

[Earl Brasse]

Tracvision,
if you run across any of just the bushings, please let me know.
I could use 3.

Kevin,
yes, that should be it.
Mine would be for a Senior turret.
Strangely ?, my Universal III shellholder turret only has standard size hole but it does have 3 large die holes.
I found a Zamage on E-Bay.
He has no listings.
Did he have it listed as a Hollywood part or just a part that happened to be the right size?

[Negster]

You could try searching for a drill bushing of the correct size. I was going to do that but ended up just turning my own.

[Kevin Rohrer]

Kevin,
yes, that should be it.
Mine would be for a Senior turret.
Strangely ?, my Universal III shellholder turret only has standard size hole but it does have 3 large die holes.
I found a Zamage on E-Bay.
He has no listings.
Did he have it listed as a Hollywood part or just a part that happened to be the right size?

I have the same one on my Senior Turret. Will check, but they look to be the same size. The dimensions I measured on those for the Super Turret are:

Height: .725"
Diameter: .745"
Wall thickness: .123"
Interior diameter: .5"

The guy's name is Harold, and his email is: hollywoodreloadingtools@gmail.com
He charged me $10, but that was part of a much larger purchase.

Super Turret update: Frame now primed. All missing parts are in-house. Bluing in-progress. New thread to follow.

[Earl Brasse]

Tracvision,
Speaking of plugs... what is the chart for your Hollywood shellholders, all mine are marked with a caliber?

Kevin,
Yes, my press hole is .745.
I believe Tracvision is Harold, & he doesn't have any loose ones but may be able to dig one up at another location.

[Tracvision]

Earl, PM sent. I have the original 3/4 to 1/2 shell holder bushings in stock.

[Earl Brasse]

Tracvision,

Great! Pm sent. Thanks

[Leadslinger541]

I’m looking for the reducer bushings as well if anyone has a good source.

[LUBEDUDE]

The new owner of Hollywood Reloading Tools:

Bob Cordes
928/649-5922

sedroc@centurytel.net

He has your bushings and tons of other Hollywood parts and accessories.