Smith & Wesson Sigma sw9ve

[William Yanda]

Anybody feeding a Sigma, my first plastic gun, first 9mm.
Bill

[JeffG]

I am feeding the SD9VE. I expect the barrel is the same. I use both Lee 356-120-TC (COAL = 1.07) and TL356-124-TC (COAL 1.115), sized to .357 with a typical load of 4.3-4.4 grains Unique. The 356-120-TC gets lubed with White Label 50/50 while the TL356-124-TC gets LLA, 2 coats, one before and after sizing. Both work like a champ with no leading. I get a little antimony wash since I'm typically using just COWW with 2-3% tin alloy, but it brushes right out with 2-3 passes.

[Virginia John]

I feed my Sigma 124 LRN and 124 LTC both are sized to .358 and sitting on top of HP-38 or W231. Works good.

[trapper9260]

I feed my lyman 147 gr and size to 356 and no problems with leading.I also feed others also.

[William Yanda]

Can anyone speak to the choice between round nose and truncated cone designs?
Thanks
Bill

[trapper9260]

I use both RN and RFN in my and it cycle well.

[Earlwb]

My SD9ve seems to work with everything so far. it just shoots it all. It doesn't seem picky at all about the ammo. I did break down and install a Apex trigger spring kit in it though. I just couldn't stand the horrid trigger pull arrangement that it had from the factory.