View Full Version : 450 Thumper
Just curious anybody here casting for the 450 Bushmaster . I have one and it shoots factory ammo great . Just wondering what could be done for it casting . It takes hogs on our family land and drops them on the spot .
dondiego
04-30-2016, 10:03 AM
My son has one and I hope to try it with cast soon. He hasn't accumulated enough brass yet. I can't find any.
Tatume
04-30-2016, 12:19 PM
Any bullet for the 45 Colt should chamber and fire, but a bullet design other than semi-wadcutter will probably feed more reliably. Personally, I would ask Tom at Accurate Molds (http://www.accuratemolds.com/) to make a mold of the LFN variety with a gas check heel and without a crimp groove, at about 250 grains.
475AR
04-30-2016, 08:58 PM
I had Tom at accurate molds cut this bullet 45-300H for my 45 Win Mag and it should work great in the 450 bushmaster, If you want to try some I an finishing Hi-tec coating them and would be happt to send you a few.
http://www.accuratemolds.com/bullet_detail.php?bullet=45-300H-D.png
Also if your gun is a picky feeder, look at the LBT LFN. They feed in most everything and are accurate.
rockrat
04-30-2016, 10:41 PM
I have shot the Lee 310gr boolit thru mine and it shoots great. <2"@100yds
475 AR that would be great thanks . I will pm you my address .
475AR
05-02-2016, 07:35 AM
I will get them boxed up, do you have the ability to size them? If not I will size them to .452.
I dont have the ability at this time to size them a lubsizer is on the list of things to get .
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.