View Full Version : Load Data for Cast Bullets in 10mm
I plan to load Missouri Bullet Co. 180 gr bullets, 18 BHN in my 10mm. I have looked for load data, but am unable to find it. Would it be acceptable to use the data for 180 gr FMJ, of the same caliber?
Thanks
Lloyd Smale
04-27-2016, 07:30 AM
I don't push my glock loads to the max. So if I was looking at data for a 180 jacketed I would back off 1-2 grains.
tsubaki
04-27-2016, 02:31 PM
Lyman 4th Edition (2013) has a 180gr (10 to 1 alloy) RCBS #40-180-FN listed with 12 different powders.
What powders do you have?
pjames32
04-29-2016, 11:33 AM
Accurate Arms website should have data.
fredj338
04-29-2016, 05:21 PM
USe jacketed data as a start point, do NOT push max jacketed data with a lead bullet.
sharpshooter3040
04-30-2016, 11:20 PM
Rcbs 40-180 and 5 grains Winchester super target works awesome in my S&W 610
Sent from my iPhone using Tapatalk
spfd1903
05-01-2016, 01:44 AM
Accurate Arms website should have data.
Tried loads listed in the Lyman 4 th edition Cast bullet handbook, and Western powders (Accurate, etc.) website. The three best groups with an NOE 180 grain were with data from Western: ACC#7, ACC#9, and True Blue, from a Glock 20 with LW barrel.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.