Accurate 469-350VG

[GunsAndHarley]

First cast! Just got my first mould this afternoon and gave It a shoot. Oups! 460-350VG
http://uploads.tapatalk-cdn.com/20160426/9af70aa56164c0025a88bc59cd05ede0.jpg

[osteodoc08]

I have that mold and it is a fine mold. Works well with a good dose of RL7 or Varget.

Your specimens look very good. What do you plan on lubing them with?

[GunsAndHarley]

I have that mold and it is a fine mold. Works well with a good dose of RL7 or Varget.

Your specimens look very good. What do you plan on lubing them with?

I will use a blend of moly grease with soy wax, atf fluid and stp. I reload a few and I have some problem feeding. Sometime, the bullet strike high and jam. Does It feed well in your gun?

[osteodoc08]

I will use a blend of moly grease with soy wax, atf fluid and stp. I reload a few and I have some problem feeding. Sometime, the bullet strike high and jam. Does It feed well in your gun?

Feeds well in both my Marlins.

[GunsAndHarley]

Feeds well in both my Marlins.

What OAL do you have with this bullet?
I have 2.549. Maybe a bit shorter would help!

[quietmike]

Have this mold as well. Feeds great for me @ 2.545, with brass trimmed to 2.095.

[osteodoc08]

What OAL do you have with this bullet?
I have 2.549. Maybe a bit shorter would help!

I'd have to measure.

What are you launching these out of?

[GunsAndHarley]

i'd have to measure.

What are you launching these out of?

a 1895g.

[GunsAndHarley]

Have this mold as well. Feeds great for me @ 2.545, with brass trimmed to 2.095.

My brass 2.105! I will trim to 2.095 and see if It help. The jam occurre only when I cycle realy fast. No problem if I go easy.

[runfiverun]

he is trimming the cases so that they will crimp in the boolits groove.