View Full Version : Accurate 469-350VG
GunsAndHarley
04-26-2016, 04:30 PM
First cast! Just got my first mould this afternoon and gave It a shoot. Oups! 460-350VG
http://uploads.tapatalk-cdn.com/20160426/9af70aa56164c0025a88bc59cd05ede0.jpg
osteodoc08
04-26-2016, 09:51 PM
I have that mold and it is a fine mold. Works well with a good dose of RL7 or Varget.
Your specimens look very good. What do you plan on lubing them with?
GunsAndHarley
04-26-2016, 10:01 PM
I have that mold and it is a fine mold. Works well with a good dose of RL7 or Varget.
Your specimens look very good. What do you plan on lubing them with?
I will use a blend of moly grease with soy wax, atf fluid and stp. I reload a few and I have some problem feeding. Sometime, the bullet strike high and jam. Does It feed well in your gun?
osteodoc08
04-27-2016, 04:36 AM
I will use a blend of moly grease with soy wax, atf fluid and stp. I reload a few and I have some problem feeding. Sometime, the bullet strike high and jam. Does It feed well in your gun?
Feeds well in both my Marlins.
GunsAndHarley
04-27-2016, 05:38 AM
Feeds well in both my Marlins.
What OAL do you have with this bullet?
I have 2.549. Maybe a bit shorter would help!
quietmike
04-27-2016, 06:11 AM
Have this mold as well. Feeds great for me @ 2.545, with brass trimmed to 2.095.
osteodoc08
04-27-2016, 06:25 AM
What OAL do you have with this bullet?
I have 2.549. Maybe a bit shorter would help!
I'd have to measure.
What are you launching these out of?
GunsAndHarley
04-27-2016, 08:42 AM
i'd have to measure.
What are you launching these out of?
a 1895g.
GunsAndHarley
04-27-2016, 08:45 AM
Have this mold as well. Feeds great for me @ 2.545, with brass trimmed to 2.095.
My brass 2.105! I will trim to 2.095 and see if It help. The jam occurre only when I cycle realy fast. No problem if I go easy.
runfiverun
04-27-2016, 10:12 AM
he is trimming the cases so that they will crimp in the boolits groove.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.