Lee 4 Hole Turret Lock Rings

[deltaenterprizes]

Just converted a 3 hole turret press to a 4 hole and there is not enough room for the existing lock rings. What do I do now?

[Pavogrande]

I presume smaller rings are not practical? How about a spacer below alternate lock rings thick enough to allow rings to overlap. My two cents -

[MT Gianni]

I had some older RCBS dies that the lock ring would not work on a turret press. I switched them with another brand of die and ordered new ones. Gianni

[Pepe Ray]

Engineered for LEE rings. I replace all my die rings with LEE rings.
Pepe Ray

[Dale53]

Pepe Ray's answer will work. So will Dillon's new "small rings". Since I use so many Lee dies (I like them) I have plenty of the Lee rings for the Lee turret.

However, for the Dillon, I use Lee dies with the even smaller diameter Dillon (New) rings. Dillon's tool rack is a worthy addition to your Dillon presses - holds all of the Allen wrenches along with a new, small diameter wrench that fits the new Dillon rings. This combination is GOOD.

Dale53