Wsl tang sight threads

[enfield]

can someone confirm for me that the Winchester self loaders, 1905, 1907, 1910 tang sight holes are 10-36 thread. And where can a guy get screws for one ? thanks

[John Taylor]

Brownells and midway both have tang sight screws for the Marbles sight, try to figure out which one you need. The 86,92,94,90 and a bunch more use the 10-36 ( actually 10-35.5 from what I have heard). I usually make them as needed instead of waiting on getting them shipped.

[gunguychuck]

Enfield I checked my 1905 Winchester and it is not drilled and tapped for a tang sight.

[.455 Webley]

My 1907 .351 is drilled and tapped for the tang sight and just about any other sight that you can imagine. It does have the mounting screws in the holes however. I could pull one and measure it at work on Monday for you. Let me know if this is still unanswered by Sunday night.

[enfield]

Still not 100% sure but I'm leaning towards the 10-36 thread, I see Brownells has screws so I will probably go that route, thanks for checking.