View Full Version : Cast bullet load record data
Doc Highwall
04-12-2016, 12:30 PM
I have been busy lately getting ready for a big test this summer and had to cast a lot of bullets for it. Well I made up some data sheets for both casting and heat treating cast bullets in a PDF format and posted them in the casting section.
Somebody suggested I make up a data sheet for reloading cast bullets so I did and here it is in PDF format so you can download it and print it out for your use.
Doc Highwall
04-12-2016, 01:08 PM
I added neck tension to the data.
Walter Laich
04-12-2016, 05:43 PM
Wow! that's a lot of info
I'm lucky if I print out a business sized card with the caliber, weight and use for my boxes of cast bullets.
I do have an Excel sheet that I keep loading data for .32s up to .45-70s.
I find this is enough data for me to load repeatable batches of ammo
Doc Highwall
04-14-2016, 02:16 PM
I noticed that I made a few small mistakes with the first labels, like I left out the cartridge case weight and groove/bore dimensions, I fixed it in version #3. If you see anything else let me know and I will fix it.
sparky45
04-14-2016, 04:51 PM
Wow!! Thankd Doc.
Doc Highwall
04-16-2016, 05:48 PM
Bump so all can see and add feedback.
gunshot98
04-17-2016, 10:51 PM
Thanks Doc. That is great.
Doc Highwall
04-19-2016, 08:23 PM
Another bump.
Doc Highwall
04-28-2016, 07:17 PM
Another bump.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.