NOE 502 molds load data?

[dakotamar]

I have acquired some NOE bullet molds and need some load data for them. I hope to use H110 and need the COAL and load if anyone has some links or info on them. My google fu has only turned up a page that no longer exists.

490Gr WFN and the other a 4 cav mold for 450 500 550 600Gr RF.

thanks
Dak

500 MAG 500 S&W smith and wesson

[scottfire1957]

What cartridge?

[dakotamar]

What cartridge?
sorry, updated the thread. 500 S&W

[JonB_in_Glencoe]

I have a version of the "450 500 550 600Gr RF", except mine is a 3 cavity all 550gr. and BTW, that design will cast light, like about 35gr to 40 gr. light.

I, personally, wouldn't load it with H110 with a plain base boolit that lacks a crimpgroove, in a cartridge with the massive case capacity of the 500. I use AA4100. for more info on other powders, lookup John Ross' website.

edited: I searched for John Ross' website, as he has a nice write-up and load data for the S&W 500, mostly using slower powders...but I can't find the website, it must have been taken down, it surely would have given you some insight.

[dakotamar]

thanks, i saw that info for Ross' website, too bad it is down. I will look around for some AA4100 powder. what kind of load are you using for the 550?


I have a version of the "450 500 550 600Gr RF", except mine is a 3 cavity all 550gr. and BTW, that design will cast light, like about 35gr to 40 gr. light.

I, personally, wouldn't load it with H110 with a plain base boolit that lacks a crimpgroove, in a cartridge with the massive case capacity of the 500. I use AA4100. for more info on other powders, lookup John Ross' website.

edited: I searched for John Ross' website, as he has a nice write-up and load data for the S&W 500, mostly using slower powders...but I can't find the website, it must have been taken down, it surely would have given you some insight.

[JonB_in_Glencoe]

25gr. of AA4100. I don't have any chrono readings.