View Full Version : Long handled magnet for ss pins or chips
CASTING MACHINE
03-16-2016, 02:41 PM
Found this a harbor freight. Long handle. Great for picking up the ones that got away. The hoop inside the handle is the release. $10.00 and it works well. 163719
CastingFool
03-16-2016, 03:04 PM
I use a 4lb magnet off a large speaker, attached to a broomstick, to pick up roofing nails out of the grass after doing a roofing job. It works well. No release, you have to pick the nails off manually, but the price was right.
Artful
03-16-2016, 04:13 PM
I use a 4lb magnet off a large speaker, attached to a broomstick, to pick up roofing nails out of the grass after doing a roofing job. It works well. No release, you have to pick the nails off manually, but the price was right.
take a thin cloth sack - but it over the magnet should still pick up all the nails
then turn the sack inside out and pull the nails off. Nails in the sack - dispose and put back on the magnet.
superc
03-16-2016, 05:44 PM
take a thin cloth sack - but it over the magnet should still pick up all the nails
then turn the sack inside out and pull the nails off. Nails in the sack - dispose and put back on the magnet.
That would work well for steel chaff near the lathe or the drill press too. :)
Thanks for the tip Artful,I knew that but some of the grey matter had deleted it and it needed to be refreshed.
tazman
03-16-2016, 06:15 PM
Depending on the type of stainless steel you are using, the magnet may not work to pick it up. Some types of stainless are non-magnetic.
bstone5
03-16-2016, 06:40 PM
I also use a magnetic out of a speaker, a plastic bag also works to catch the cuttings around a lathe and milling machine.
alfloyd
03-16-2016, 07:52 PM
I have one like that and the short handle one also.
Lafaun
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.