oldracer
03-15-2016, 12:51 PM
Well yesterday went to the range with the Pedersoli Gibbs to see how it worked with my re-cast pure lead bullets which have allowed my home build slug gun to get better than 1 MOA at 300 yards now. So I started at 100 yards and all other specs were the same as the home built and used my home made "Shoot-n-See" type targets. These are black with a 3 inch white circle in the middle and what did I find......I could not see the insert in the front sight, black on black. So I shot 15 or so rounds and they were as good as expected with some touching and then a pulled shot, ETC. So last night I took half a dozen and made a large white area in the middle with a red dot in the center. That should help out that issue I figure?
I have the parts coming to build another 45 caliber slug gun and this one will be an under hammer using an Allen action and tiger maple stock. I am getting the parts from Pecatonica River and plan to use a tang sight and front globe. I plan to use one of the 209 primer adapters such as on the rifle that I got from Roger Johnson so there should be great ignition? I'll post some pictures when it gets assembled.
I have the parts coming to build another 45 caliber slug gun and this one will be an under hammer using an Allen action and tiger maple stock. I am getting the parts from Pecatonica River and plan to use a tang sight and front globe. I plan to use one of the 209 primer adapters such as on the rifle that I got from Roger Johnson so there should be great ignition? I'll post some pictures when it gets assembled.