Rossi R92 .45 groove diameter?

[gilgsn]

Hello,

Has anyone slugged a Rossi R92 in .45 Colt?

Thanks,

Gil

[Yodogsandman]

You can't go by someone else's slug, each rifle is an individual.

[runfiverun]

all three of mine shoot 452 just fine.
if it's a new taurossi don't be surprised if it has a 454 barrel on it.

[scottfire1957]

Hello,

Has anyone slugged a Rossi R92 in .45 Colt?

Thanks,

Gil

Oui. Someone has. Not me. I load and shoot. It is not a precision machine.

I shoot the same loads I use in my Ruger pistols. They work well.

Bon chance.

[gilgsn]

Thanks guys, I don't have the rifle yet but I do have a RCBS 45-270-SAA mold, just wondering what sizer I'll need. I thought they ought to all be the same since they must be using the same tooling..

Gil

[runfiverun]

when Rossi had them they were darn good rifles.

now that Taurus has them,,,,, you are the final inspector for the company.

I would get the rifle in hand.
look it over very well [wood to metal fit is a big indicator of the rest of the rifles quality]
clean the insides of the action. [completely strip it down]
then slug the barrel [directions in a sticky here]
then I would work on making the boolits and getting a sizing mold coming.