PDA

View Full Version : Lyman mag 25?


GunsAndHarley
02-29-2016, 12:44 PM
Looking to get a mag 25 in Canada. Canot find a resseler. Anyone know where to get one ?
Gofaaast
02-29-2016, 03:08 PM
MidwayUSA had 2 on clearance yesterday. I don't know if they ship to Canada though.
GunsAndHarley
02-29-2016, 08:49 PM
MidwayUSA had 2 on clearance yesterday. I don't know if they ship to Canada though.

No! They dont
VHoward
02-29-2016, 09:09 PM
http://www.grafs.com/retail/catalog/product/productId/26143 Don't know if this vendor ships internationally.
http://www.midsouthshooterssupply.com/item/000152800382/Mag-25-Digital-Melting-Furnace-115-Volt- This vendor will.
GunsAndHarley
03-01-2016, 09:14 AM
Thank you VHoward Midsouth do ship to Canada [emoji16]
VHoward
03-01-2016, 10:31 AM
Midsouth has the better price, but with shipping to Canada and the fees Midsouth charges international shipments you might end up at the higher price again. And then the exchange rate. Good grief.
RKJ
03-01-2016, 09:32 PM
Not trying to hi-jack the thread, but does the guide on this work with Saeco 4 cavity and Lee 6? The 2nd review says it doesn't.
VHoward
03-01-2016, 09:50 PM
The mold guide is the weak spot if you don't use Lyman molds. Many modify it to work with what they have. They should have made it adjustable to begin with.
RKJ
03-02-2016, 05:25 AM
The mold guide is the weak spot if you don't use Lyman molds. Many modify it to work with what they have. They should have made it adjustable to begin with.

Thank You, I think I'll wait for the RCBS.
AbitNutz
03-02-2016, 08:04 AM
It's true. The mold guide is the best there is but it is too narrow to fit all molds. So I filed down one side of mine. It took a little time but it's only aluminum. It really was short sighted to make such a nice guide fit only the narrower molds on the market.

On the other hand...all you have o do is remove it and you still have an adjustable shelf...so it's really not that big a deal.