View Full Version : Henry Big Boy steel 44 20" BBL
Wayne74
02-14-2016, 02:29 PM
I have been working with my Henry and Lil'Gun and I am getting 5 shot groups under 3" at 100 yrds with jacketed bullets. So far I have not been able to get below 5" groups with 250grn Keith style SWC and Lil'Gun. Does any one have a good load for this rifle?
Thank you.
Wayne
Static line
02-14-2016, 05:46 PM
I have been working with my Henry and Lil'Gun and I am getting 5 shot groups under 3" at 100 yrds with jacketed bullets. So far I have not been able to get below 5" groups with 250grn Keith style SWC and Lil'Gun. Does any one have a good load for this rifle?
Thank you.
Wayne
I PM'd you so check your messages.
How did those SWC's feed in your Henry ?
Wayne74
02-14-2016, 10:13 PM
I had to single feed them when the case was crimped in the crimp grove so I crimped over the shoulder to get the OAL down to fact specs and they feed fine.
Wayne
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.