Win. 1885 extractor?

[rockrat]

Any idea where to find one for an old hi-wall? Looking for one for the 405 Win case. Thanks.

[country gent]

You could try The Gun Parts Corporation in West Hurley New York. Also contact C SHarps as thier reproduction may be a close enough copy to interchange with a little fittling. Another would be Pedersolis and or Ubertis High wall extractor some of these are direct copies of original rifles ( reverse engineering) so you might get lucky

[Gunlaker]

Montana Vintage Arms is also making highwall parts from what I've been told.

Chris.

[NSB]

you can try posting this on www.assra.com It's a website for American Single Shot Rifle Association. Those guys live and breath this stuff. Someone will direct you to what you're looking for. good luck

[John Taylor]

Bolder river casting has the castings if you want to fit your own. C. Sharps make new actions and parts.

[marlinman93]

Yes, MVA just started making Winchester 1885 parts, and they should have an extractor.

[rockrat]

Thanks for the info. have one coming from C. Sharps