Wanted for Herters Super Model 3 press

[redleg105]

I need a Primer Arm Pivot Spring for a Super Model 3 Press.

[gwpercle]

If you are referring to the spring that pushes the primer arm out, away from the press, I replaced mine with the coiled spring from an old ball point pin. You know the kind of ball point pin that has a retractable point. Take one apart and use it.
CH4D also has universal replacement parts, rams , primer arms and cups. They might even have springs. and shell holder adapters that all use of standard snap-in shell holders. Check out their site. www.ch4d.com (http://www.ch4d.com).
Gary

[TNsailorman]

Yeah, I tapped the same source for my old C&H C press primer arm press. Or go to a hardware store and buy the appropriate size(diameter) spring that is a little longer than you need and cut and try till it works correctly. I did that on an old press also years ago. Both methods work.