What is this????

[abunaitoo]

Found this with the stuff from the house I helped clean out.
It has a CH stamp one it.
A die will fit into the hole.
Could it be some kind of swaging tool?????
158790158791

[labradigger1]

Perhaps, it appears to have an eccentric or lobe on the piece the handle attaches to.

[maxreloader]

i have seen a lot of reloading stuff but never seen one of these... maybe shoot Dave a pic... dave@ch4d.com he may know.

[Ickisrulz]

It fits on top of the C-H swage dies to push out the bullet rather than smacking it out with a mallet.

[Johnny_Cyclone]

+1
It fits on top of the C-H swage dies to push out the bullet rather than smacking it out with a mallet.

158807

[abunaitoo]

So how dose it work????

[Blanket]

eject for CH dies

[abunaitoo]

So it goes under the die, on top of the press.
The ram goes up, pushes the stem up and this pushes it back down??????
Couldn't find anything on the CH web site.
Is there something on youtube???

[Wayne Smith]

I have a copy of the CH press, made or sold by Herters. If you want to sell it let me know.

[troyboy]

The hits just keep coming. I have no idea how or why someone in Hawai'i would have such an extensive collection but you have a goldmine. Good for you!

[Ickisrulz]

So it goes under the die, on top of the press.
The ram goes up, pushes the stem up and this pushes it back down??????
Couldn't find anything on the CH web site.
Is there something on youtube???

http://i1134.photobucket.com/albums/m606/ReloaderFred/BulletSwaging003-1.jpg

[abunaitoo]

Thanks for the picture.
Now I know what it does.
It will go with the swage set and jacket cups.

[abunaitoo]

The hits just keep coming. I have no idea how or why someone in Hawai'i would have such an extensive collection but you have a goldmine. Good for you!

It is surprising to me to.
We have only one shooting range on island that non-military can go to.
Still sorting through stuff.

[Sam Casey]

Nice catch; good eye!