View Full Version : Need to rebuild my reloading room
flyingmonkey35
01-09-2016, 02:58 PM
I picked up a rcbs rockchucker supreme for 53 bucks a cableals.
Found it in the return room. It was a display model. Buahha.
I got home and for d out my current bunch is not up to the task. It can't Handel it.
I'm up for ideas for a new bench top.
I want zero movemnt when I use it and my load masters.
Thoughts??
dragonrider
01-09-2016, 03:00 PM
Bolt the back or you bench to the wall and the feet to the floor.
flashhole
01-09-2016, 06:47 PM
http://img.photobucket.com/albums/v69/GuideGun/MainReloadingBench.jpg (http://smg.photobucket.com/user/GuideGun/media/MainReloadingBench.jpg.html)
Hard Maple bolted as discussed above helps also.
Wayne Smith
01-09-2016, 08:30 PM
I mounted (lag bolted) a ledger board to the wall and then bolted the shelf to that. Bench is a double layer of 3/4" ply contact cemented and screwed together. Front legs are mounted to blocks screwed to the underside of the bench. Except for lifting forces it is solid.
shooter93
01-09-2016, 09:08 PM
A ledger board on the wall as noted....don't negate using a 1-3/4 inch solid core door as the top. Not to expensive, very ridged and less work to install.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.