Petrol & Powder
12-26-2015, 10:29 PM
I have an assortment of molds and handles. My RCBS mold blocks have a 0.300" slot in the block that accepts the handles and the RCBS handles are about 0.295" wide, so about .005" clearance; no problem there.
The SAECO mold blocks have slots that are .315" and the SAECO handles are .307" - They work great with SAECO mold blocks but the SAECO handle will not fit the RCBS blocks.
I'd like to be able to use the SAECO handles on the RCBS mold blocks and I'm thinking about removing a little metal from the SAECO handles so they will fit the RCBS blocks. Before I remove that .012" of material I'd like to know if I'm making a mistake.
Anyone done that before?
The SAECO mold blocks have slots that are .315" and the SAECO handles are .307" - They work great with SAECO mold blocks but the SAECO handle will not fit the RCBS blocks.
I'd like to be able to use the SAECO handles on the RCBS mold blocks and I'm thinking about removing a little metal from the SAECO handles so they will fit the RCBS blocks. Before I remove that .012" of material I'd like to know if I'm making a mistake.
Anyone done that before?