Ordered a Accurate mold

[knifemaker]

I thought it was about time to order another Accurate mold. Ordered a 4 banger alum. mold with 2 different boolit cavities. Two cavities for a #31-130T for my Ruger mini 30 in 7.62X39 mm and two cavities for a 36-160G for my Rossi M-92 in .357 mag caliber. Both are gas check designs since I plan to shoot at a high velocity with both rifles. Having two boolit designs in one mold is a neat feature that Accurate allows a caster to request. [smilie=s:

[GWM]

Yes that is really great. No one offers the options and service that Accurate does.
I have one of his with three different designs in one mold :) .

[Hickok]

Had Tom make one for my 38-55 and it is excellent. Asked his advice and he told me what would work. Perfecto!

[knifemaker]

Well the 4 banger mold came in today just 5 days after ordering it. Great turn around time from Accurate molds. Inspected the mold and it is a clean precision job. My only problems is that I am in the middle of making up some custom knives for a upcoming knife show and will not be able to mold any boolits until the end of January so I can test them out in my Rossi model 92 357 mag and my Ruger mini 30 7.62x39 mm rifles. I'm not worried, my previous Accurate mold dropped great bullets that was very accurate in my Ruger Blackhawk 41 mag.

[Abenaki]

Knifemaker

What mold did you get for your 41?

The only mold that I have for the 41, is the Lee 195 grain swc. It is a good mold.
But was wanting to get some thing from Accurate molds. Maybe in the 225 grain range.

[knifemaker]

Abenaki I got the 41-220K in a brass 4 banger. It will print 6 shot 25 yard groups of 1-1/2 inch with a top load of W-296 powder. I lucked out on that Ruger Blackhawk. All throats were consistent 0.15 over the barrel grove dia. Did not have to open the cylinder throats as required on some guns. Only got the brass mold to see how they worked. Very good mold, but Tom's alum. molds are great also. Would not want brass in a 6 banger as it would get tiresome on a long casting session.

[krems]

That 41-220k mold looks great. Looks like you got a shooter. I've been looking at the 41 caliber for a while as it is one caliber I have never owned. Having 2 different bullets in a 4 banger is a great option. I much prefer the aluminum molds in 4 cavity. Those 4 cav. Brass molds get heavy real fast. Give us a report on that Rossi .357 when you shoot it.