which top-punches for several boolits

[WouterNL]

Good afternoon,

I'm planning to buy a rcbs lubeamatic and I found out that besides sizing-die's I need also top punches.

At the Castpics site I found a referencechart but not for all moulds I have.

Maybe someone knows which top punches I need for the following moulds:

Lee 312-160
Lee 312-155
Lee 309-170
Lee 329-205


RCBS 30-150-FN
Saeco 081


If someone knows a fine adress where I can buy all the punches for a nice price, please let me know aswell!
Thanks for reply's!
merry cristmas!

[fryboy]

i think i used a 413 ( Lyman) for the 312-155 and 160 , i did have to apply a slight radius to the bottom lip as it seemed to have a burr on the one i have , my 467 ( again lyman ) also worked and is perhaps a more common top punch

any flat nosed can use a smooth head 1/4" bolt ( you may have to make the head smooth as sometimes they're hard to find )