View Full Version : 9mm lee 120tc unique / hp38 load?
kryogen
12-23-2015, 10:29 PM
Anyone has a load data that they use in 9mm with the lee 120tc with either unique or hp38?
I have some unique left and 8 pounds of hp38, need to test loads for my 120tc.
OAL is 1.050
sized 358
glock 17
Thanks
kryogen
12-23-2015, 10:49 PM
I could use the 231 load data from lyman and try 2.9-4.4
I guess I'll try a few around 3.8 and see ?
around 1115 fps at 23 000 cup
Love Life
12-23-2015, 10:50 PM
What does the reloading manual say?
kryogen
12-24-2015, 12:15 AM
What does the reloading manual say?
2.9-4.4
963fps-1264
17000cup to 29600cup
my autodisk gave me a 3.65 grains load. I'll try this load 20 rounds and see how it works.
Love Life
12-24-2015, 12:31 AM
Good luck and I hope you get it worked out!
lead-1
12-27-2015, 02:06 AM
Take this as you will and work your load to your gun but I load the Lee 356-120-TC with Unique.
I use 4.0 grains of Unique and the boolit seated to 1.060" to work in my pistols, also I tumble lube this boolit in 45-45-10 lube.
It works great for me but your mileage may vary.
loadmak
01-03-2016, 09:33 PM
I use the TL356-124TC with 4.2 grains of Unique. 1.045" OAL. Not sure exactly how different the 120 is from the 124 grain, so the load and OAL might vary some.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.