PDA

View Full Version : what Boolit Will Work?



JohnH
12-13-2015, 05:34 PM
Last week I bought a Rossi M92 in 357 Magnum. I loaded some 357 Mag cases using the Lee 358158 RF and the gun won't feed them from the magazine. The meplat/body of the nose is too fat and it hangs up on the edge of the chamber. I can sinlge load it fine from the top, but it's a lever dang it and needs to feed from the magazine ;) I ran some Magtech 38 Special +P 158 grain JHP and it feeds them fine. (It should, short case round nose) I'm know someone out there has been through this, so what boolit wil these rifles feed using a 357 Magnum case? Thanks

waco
12-13-2015, 06:08 PM
I run the NOE 360477 and the NOE 180 WFN

I also ran a few hundred J words through the gun to break it in a bit.

whisler
12-13-2015, 09:33 PM
Lee 358-125RF.

sandman228
12-13-2015, 09:37 PM
Make your oal a little shorter . Mine throws fits like that with the lee 158 round nose in 357 cases but will run same bullet fine when loaded in 38 spl . I mostly load the lee 158 swc bullet for mine ive even ran 148 gr wad cutters through it .