handles for NOE

[chevyiron420]

I have a set of large RCBS handles. Will they fit on the NOE mould?

[Beagle333]

I didn't know RCBS handles came in more than one size. The usual RCBS handles will fit, but not as well as desired, as the grooves on the RCBS molds are narrower than the NOE and Lyman molds, so the handles won't only let the molds swivel about the pin, but they will also let the blocks wobble a bit. If you are careful and don't booger up the alignment holes (since the mold halves might be more out of line than with Lee handles), they should let you cast boolits happily. 8-) Try to pick up a set of Lee commercial handles when you see one available. :coffeecom