View Full Version : Win 30-30 LOADS IN WIN 94 USING SAECO 307
haswipp
12-09-2015, 06:39 PM
Hi,
Does anyone have any load data for a win 94 cal. win 30-30 using a saeco 307?
I just loaded up IMR 4198 19gr-22gr. to try out this weekend sz:310 with a BH:20. Med-Heavy crimp using Lee crimp die to the crimp groove.
Thanks
WHITETAIL
12-09-2015, 06:46 PM
No, I found IMR 3031 works for me.
Right off the bat, I was hitting right on
at 100yds.:holysheep
MT Chambers
12-10-2015, 04:50 PM
None of my loads include deforming the bullet with a Lee crimp die, just crimp with proper seating die.
Motard
12-10-2015, 05:59 PM
Idon'have acces to IMR powders but had reloaded a lot with Viht N130 wich is considered the finnic equivalent. My best load are on the lower side: 21,3 gr for boolits up to 155 gr and 20 for 178 grainer. Rifle is a win 94 20 inch barrel.
hope it helpes
ps seems that my rifle prefer N140 between 26-28 gr. less vide space in the case and lower press and speed. N140 is near to IMR 4230
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.