Mark454
11-21-2015, 10:06 PM
So I had a Lee 452 swc mold that was dropping out of round/undersized. Some places on the bullet would be .455, others would be .448 or less. I lapped this mold with valve lapping compound for around 20 seconds per cavity.
Its not perfect, but its oversized enough for me to size down to .452
Before:http://images.tapatalk-cdn.com/15/11/21/03add1755bb74c463e728ff1e14e5bd6.jpg
After:http://images.tapatalk-cdn.com/15/11/21/deb2e6c925035f760d57ef1f6287fb41.jpg
Thank God for the search button...
Its not perfect, but its oversized enough for me to size down to .452
Before:http://images.tapatalk-cdn.com/15/11/21/03add1755bb74c463e728ff1e14e5bd6.jpg
After:http://images.tapatalk-cdn.com/15/11/21/deb2e6c925035f760d57ef1f6287fb41.jpg
Thank God for the search button...