View Full Version : Riveting Ejector & Ejector Spring 870 12 Ga.
EMC45
11-10-2015, 02:21 PM
Has anyone done this job before?
Vopie
11-10-2015, 02:32 PM
yep, not difficult, with the proper tools, (brownells has 'em).
Goatwhiskers
11-10-2015, 03:04 PM
Sometimes there is enough material left of the original rivit that you don't have to replace it. If you do it is possible to insert the new rivit, then scribe a line around the head and dress the head down to the line rather than grinding it down after installation which means you have to reblue the frame. A touch of Oxpho-blue finishes the job. GW
wistlepig1
11-10-2015, 06:33 PM
I need to do this, were did you get the Ejector Spring?
Thanks
Vopie
11-10-2015, 07:31 PM
ejector, spring, and tools all aval. from Brownells.
wistlepig1
11-10-2015, 10:13 PM
Thanks Vopie for the info----I got to get going on it.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.