georgerkahn
10-26-2015, 07:39 AM
The local range having elected "NO indoor shooting" (health dept. fear re banquets, etc., being curtailed due to lead in air), several shooters have elected to start a 10-meter AIR rifle league -- replacing (?) the .22s with PCPs. (The winters ARE long, here). To the point, being retired with modest income I purchased a USED Air Arms T200 .177 PCP. It is indeed gorgeous, almost $400 less than the AR20 Hammerlis others bought, and am looking forward to shooting it. However, cleaning, etc., may be a challenge, as seller did not provide the little plastic bag of goodies including some Allen wrenches, O-rings, and MOST important to me: the tool required to remove its stock.
I've email CZ (the manufacturer) in Czech Republic, who responded AA in the UK is the place to contact -- but the 'phone number doesn't seem to work, and nowheres on their site can I find an email address for them.
Hence, any contact information on Air Arms is sought; and/or their stock removal tool for CZ200, T200, 200S, and variants. (I contacted several US dealers (e.g., Pyramid) who do not have these...)
Thanks!!!
geo
I've email CZ (the manufacturer) in Czech Republic, who responded AA in the UK is the place to contact -- but the 'phone number doesn't seem to work, and nowheres on their site can I find an email address for them.
Hence, any contact information on Air Arms is sought; and/or their stock removal tool for CZ200, T200, 200S, and variants. (I contacted several US dealers (e.g., Pyramid) who do not have these...)
Thanks!!!
geo