View Full Version : Rock Chucker ram dimensions
troyboy
10-19-2015, 08:18 PM
What are the dimensions for the Rc ram. Need to know what the diameter,overall length and length to pin are. Thanks Troy
dudel
10-20-2015, 01:42 PM
Which one? There are several models/versions of Rockchuckers out there.
troyboy
10-20-2015, 06:31 PM
All of them
troyboy
10-23-2015, 04:17 PM
Does anybody know what the ram dimensions are?
jsizemore
10-23-2015, 08:51 PM
RC II Ram length-8.375" (Stanley tape measure), Ram Dia.-.995", Bottom of Ram to Bottom of Pin- .312", Pin Dia.- .370" (Mitutoyo/Craftsman 6" Dial Caliper)
r1kk1
10-24-2015, 08:46 AM
What are trying to do Troyboy?
If you are thinking about the arbor press conversion it doesn't work on the RC's either.
just curious,
r1kk1
troyboy
10-24-2015, 02:00 PM
I won a lot of swaging dies that came with a ram threaded for two of the punch holders. Trying to figure out what press this ram fits. This lot came with a point form die that has a unique ejector, the ram,3 punches two that screw into the ram and one that goes in a standard ram and a 22lr derim die and a mag derimmer. Working at getting a core seater so i can give swaging some 22's a try.
troyboy
10-24-2015, 02:01 PM
Thanks jsizemore
lightman
10-25-2015, 12:32 PM
Troyboy, My RC is late 70's vintage. The ram is 1.0 inch dia, 8-3/8 in long, the pin is .470 from the bottom and pin dia is .370.Hope this helps some.
seagiant
10-25-2015, 12:46 PM
Hi,
You might want to ask here! http://castboolits.gunloads.com/forumdisplay.php?41-Swaging
troyboy
11-05-2015, 09:06 PM
Are the RC1 and RC11 rams different( it sounds like the difference is the toggle pin is a different legth from the bottom of the ram). They are the same p# in the RCBS parts drawing. Does anybody have the RC supreme dimensions?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.