View Full Version : Primer Catcher
Sasquatch-1
10-19-2015, 05:06 AM
Has anyone used either of these primer catchers with a Rock Chucker and how did they like it?
151425
151426
rancher1913
10-19-2015, 07:17 AM
mines not that nice. it came with the chucker and catches about 75% of the primers. if I use paper towel wedges to keep it tight the % goes up.
Sasquatch-1
10-19-2015, 08:21 AM
I believe mine came with the same one you have. I am considering one of the ones pictured.
mines not that nice. it came with the chucker and catches about 75% of the primers. if I use paper towel wedges to keep it tight the % goes up.
VHoward
10-19-2015, 09:43 AM
There are files on Thingiverse so you could print your own if you had a 3d printer. I don't have a rock chucker, so I never needed one.
Taylor
10-19-2015, 10:30 AM
I have one,ran a tube (which come's with it) to a plastic bottle.Love it,works just fine.
Edster
10-19-2015, 11:45 AM
mines not that nice. it came with the chucker and catches about 75% of the primers. if I use paper towel wedges to keep it tight the % goes up.
Squishy foam ear plugs work inplace of the paper towels
Mk42gunner
10-19-2015, 06:49 PM
So does that sit in front of the ram? If so how are you supposed to fit your fingers and a case in there too?
I have reworked the "primer catcher" on mine to where it actually catches about 99% of the spent primers, and drains them into a pop bottle. Of course, now I dare not take it off because I will probably never get everything aligned just right again.
Robert
Mal Paso
10-19-2015, 08:35 PM
99.99% recovery. A scrap of brass tube from the hobby shop keeps them from popping out the front. 1/2 OD soft copper tube for the chute.
Hardcast416taylor
10-19-2015, 08:56 PM
I must really be an old `mossback`! I have the old style RCBS aluminum primer catchers that came with my Jr press and the `chucker press when I bought both of them new wwwaaaaaayy back when.Robert
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.