PDA

View Full Version : Please help me identify this...



rnhathaway
10-17-2015, 10:48 PM
At the shop I work at we bought a large lot of firearms parts and this was included. It is a round tube with cut outs on the side, has a wing nut for tightening, has sights and appears to be parkerized. On the rear sight it was the numbers 10-1-71. I'm assuming that is a year. 151314151315151316

EOD3
10-18-2015, 12:37 AM
It "looks" like it might be a rifle-grenade adapter/sight. What rifle it might be designed for, I have no idea.

rnhathaway
10-18-2015, 01:01 AM
I found it. Its for a MAS-49

43PU
10-18-2015, 08:03 AM
Yeah a MAS 49 grenade sights

SciFiJim
10-18-2015, 08:56 PM
You know that someone is out there looking for one and can't find it. If you can't use it, you might list it on gunbroker.com .

azrednek
10-18-2015, 09:22 PM
I have one exactly like it and have wondered what it was for. I got it at a flea market, purchased from an illegal alien. I got the grenade launcher and a WW2 dated Mosin scope and mount for only 35 bucks. Best I could tell from his broken English he picked both items out of somebody's garbage.

Scharfschuetze
10-18-2015, 10:29 PM
Check those dots on the front blade and rear sight. I'll bet that they are phosphorous, tritium or other glowing material and that this is actually a night sight unit. A grenade sight would have the means for very high elevation settings as the trajectory on rifle grenades makes a 45/70 Trapdoor rifle look like a varmint rifle. It does not appear that this unit is capable of high angle sighting.

If it was made in 1971, I doubt that the unit's luminescence functions anymore, but you can check it by taking it outside or shining a bright light on it and then taking it in a dark room or closet. If it is phosphorous, it might glow a bit. If tritium, the half life is just over 5 years normally and its luminescence is probably as dead as the MAS 49 is as a modern battle rifle.

On the MAS 49 grenade sight, there was a hinged sighting bar behind the front sight and when folded up it provided several inches of elevation settings for lobbing rifle grenades out to a couple of hundred meters.

US Military grenade sights have used both a rear aperture and blade/post front sight in one unit, but some countries, including the French used the tip of the rifle grenade as the front sight and with the short sight radius, some extremely high angles of fire could be achieved.

MAS grenade sight folded down along the barrel. The radial grooves on the barrel allowed a soldier to adjust the velocity level of the grenade when fired by aligning the base of the rifle grenade on the desired ring.