Cast Boolit for a Uberti Cattlem in 44-40.

[terryt]

Hi:

I am looking for a cast boolit mold for a Uberti Cattlemen in 44-40.

Also what powder works well and the charge?

Thanks,

Terryt

[Outpost75]

These all work:1510546 grains of Bullseye or Red Dot, or 7.5 grains of Unique

[eljefe]

I really like Dick Dastardly's big lube bullet. I have the
Mav Dutchman 200 grain mold. This boolit carries a large
amount of lube. I shoot triple 7 2f, but I have loaded a bunch
with trailboss.

The best load will depend on what your use will be. I have loaded
and shot many rounds for cowboy action shooting. Those loads
are usually mild, unless you load black powder with no fillers.
Black powder loads are a handful.

[doc1876]

I am happy with a 200gRNFP over 13 g of IMR4227, or 5.5g of trail boss. I don't have my BP information here at work for some reason.

[terryt]

Thanks for the Info.

Terryt

[Wayne Smith]

I also use the Mav Dutchman 200gr big lube boolit mold and load it over a full case of Goex. It does move down range and gets lots of attention at the range.