Pa-63 feg

[wv109323]

Does anyone know of a forum for the PA -63. I have one that the hammer is following the slide. It looks fine when functioning by hand. Disconnector is working,sear. looks good. I can't figure it out.

[LAGS]

A friend had one years ago.
He brought it to me because it wouldn't stay Cocked after you fired a round.
I ended up replacing the Hammer and the sear I think maybe the Disconnector.
He had worn it out an Peened over all the moving parts by walking around the house Dry Firing it all the time , going Click ,Click ,Click, like it was some kind of toy.
He said, You cant hurt it, there is nothing in there so what harm can it do ?
Well, he found out.
No cartridge, no Snap cap, the metal is just hitting metal with no resistance.
I think the Hammer and other parts plus shipping cost him what he paid for the pistol.

[MaLar]

I bought one locally turned out it was missing the ejector. Couldn't find one any where.
The shop got it back. Bought a Mak instead never looked back.

[rondog]

The ejectors are known to fail on them, good luck finding one. I searched for months before I found one.

[Artful]

https://www.buymilsurp.com/pistol-parts-accessories-hungarian-pa63-pistol-c-3546_3204.html
http://www.gunpartscorp.com/Manufacturers/Kassnar-33329/AutoPistols-36850/PA-63-35058.htm