Another newbie question

[encoreman]

Can you take cast boolits that are cast with moulds designed for the lee lube system, can you run these thru lubrisizer or not. I think I know the answer is no, just asking. Thanks up front for all your help.Mac

[Calamity Jake]

{Can you take cast boolits that are cast with moulds designed for the lee lube system, can you run these thru lubrisizer or not. I think I know the answer is no}

Yes they can be ran thru a lubesizer but if there as cast size is changed very much(more than .003/.005), you may wipe out the lube grooves.

[mooman76]

Yes you can and I have done it. I was going to double lube one time and couldn't figure out why it wasn't taking the second coat. If you do you need to use the lube press first before you coat with LLA or the LLA fills up the groves first,

[Ed Barrett]

I have done it, but have better luck with LLA and shooting as cast. I have found .001" to .002" over size to be more accurate.