PID makers

[g5m]

Who all on this forum is currently making and selling pids? I'm thinking of buying one and want to at least have a chance to look at the various pids available from the folks here. I know of a couple but wonder how many there are and who they all are.
Thanks.

[OldFogey]

DeputyDog25. http://castboolits.gunloads.com/showthread.php?261890-A-Sample-of-my-work

[edctexas]

If you have any DIY skills you could build one yourself. I know some are handicapped by where they live or lack of any tools. The Auberins website sells all the parts needed and most if not all can be connected up with a screwdriver. There are several PID units that can be used. Auberins has decent english documentation. Some of the Mypin and Rex units work well but you need to know what options these come with. Their documentation is much more sparce.

Ed C

[g5m]

Thanks, All. At this time it would probably be simpler to buy than to build. Could do that however.

[Stilly]

Scott Salyers
Scott’s Casting & Reloading Restoration
12853 Bethlehem Church Road
Glen Saint Mary, FL 32040
H-904dash275dash3151
C-904dash408dash8011


I found this guy in another thread. He seems VERY knowledgeable and has a good attitude when it comes to customer service/helping you out.

I am sending him my parts and he will be building mine and adding in what I missed.

I put the dash in it to throw off spam bots.

[g5m]

Yep. That's DeputyDog.