leadchucker62
08-13-2015, 12:22 PM
Good day everyone:
So,i just reloaded my very first cast bullets.
I reloaded for my 30wcf 1909 m94 takedown.i cast the lee309 170 fp out of wheel weights with a little 50/50 bar solder thrown in,gas checks and lubed with my own lube (a bit of bees wax,a bit of minwax paste,a good squirt of lla and a good sized glob of Vaseline)its a little sticky but very slick.and i sized them to .309 and crimped them in with a lee fcd.
And i learned it all here!!!!! Thank you all.
Ok so here's my question i am also loading the same load in a 1913 rem m14 in 30 rem and was wondering if i could use the 30-30 fcd to crimp my 30 rem cases.
i only have about 250 pieces of 30rem brass so i have to be carefull with them.
Any input is greatly appreciated
Z
So,i just reloaded my very first cast bullets.
I reloaded for my 30wcf 1909 m94 takedown.i cast the lee309 170 fp out of wheel weights with a little 50/50 bar solder thrown in,gas checks and lubed with my own lube (a bit of bees wax,a bit of minwax paste,a good squirt of lla and a good sized glob of Vaseline)its a little sticky but very slick.and i sized them to .309 and crimped them in with a lee fcd.
And i learned it all here!!!!! Thank you all.
Ok so here's my question i am also loading the same load in a 1913 rem m14 in 30 rem and was wondering if i could use the 30-30 fcd to crimp my 30 rem cases.
i only have about 250 pieces of 30rem brass so i have to be carefull with them.
Any input is greatly appreciated
Z