Introduction

[Lee_Loader_Man]

Greetings to all Lee Loader Users and Collectors ~ Both Old and New Models ~
I am currently working on putting together Load charts and dipper sizes for all
Old Lee Classic Loaders so if you can mail me a copy of the Load Chart and the
directions that are with it would love it or email me just the dipper size in the
lower right corner of the table and the one it replaced if it is said to be one along
with the Caliber or Gauge it is for. Also any newer ones from Lee Precision it
is getting very hard to find Load Tables and Data on these ones too
John Bylander ~ 106 South 6th Street ~ Virginia, Mn 55792
j.bylander@msn.com
P.S. ~ 38 and 357 Loader are the same
as are 44 Special and Magnum are the same
45 Colt will load 454 Casull but need Small Pistol Priming Chamber
45 ACP will load 45 Winchester Magmun
Just need new Load Table and Dipper which you can order
as Parts from Lee from there Regular Die Sets
I am still working on others so if you can help complete
this Project lets work together ~ Lee_Loader_Man ~

[45nut]

Welcome aboard John!

[Lee_Loader_Man]

Also am looking for Old Lee Dippers and Lee shotshell Loaders
in 10 gauge 2 7/8, 28 gauge 2 3/4, 410 bore 2 1/2, and 30/06
Targeget Model Loader all with Charge Table and Directions

[floodgate]

Lee Loader Man:

Thanks for taking this on. I have recently gotten several older Lee Standard and Deluxe shotshell loaders, Target Model, "Unitized" and Standard metallic cartridge loaders, a Mequon or two; and sets of the black, red and yellow plastic dippers. I will try to pull all of these together over the next week or so and get it off to you. I'm too bogged down in Ideal/Lyman stuff to do justice to the Lees. If you don't hear from me, nag me via a PM.

Doug Elliott/"floodgate"

[Lee_Loader_Man]

Thanks any help is always welcomed
Send me a Email and I will send you a copy
of my work so far - John Bylander
j.bylander@msn.com

[Lee_Loader_Man]

Also as a Post note this booklet should wok well
with using with Ideal/Lyman 310 style tools
to load Shells using Lee or your own Dippers
So if you want a copy of results so far Email me

[Lee_Loader_Man]

kit_the_odd
The attachment is for 8 x 57 Mauser
if you cant read get a snail mail address
to me and I will get one off to you
John
Sorry to big to upload
Can email it to you

[Lee_Loader_Man]

Hello Agian
Notice some old posts about 7.62 x 54R and how Lee got the size wrong that they did a
.311 instead of .308 - well the surplus war rifles that were coming from Finland had
rifle bores of .311 so if you are looking to buy a M44 or simalar check the bore size
I have found that the .308 are far better of the Rifles - John -

[Lee_Loader_Man]

Hello
Does anyone have a 30-06 Lee Unitized Loader
for sale with Directions and Charge Table
What one Bad - LOL - John Bylander

[Lee_Loader_Man]

Just got my 10 gauge 2 7/8 but no Charge Table
Also my 410 2 1/2 inch but no Charge Table
So need them also and 28 gauge 2 3/4
Thanks - John Bylander

[floodgate]

LLM:

See PM and get back to me via e-mail. Thanks.

Floodgate