NOE. 321 130Gr. 8 mm mould Anybody shooting this?

[JWFilips]

Hi Folks:
Wanted to know who is shooting the NOE. 321 130Gr. 8 mm mould Looking to compare notes.
I have the 2 cavity with one GC and one PB @ .246"( My GEW 98 Likes 'em fat!)

Have the GC version shooting very well but want to improve my light loads with the PB boolit
So far the tightest 10 shot groups with the PB boolit come in with a 6.0 gr / 6.5 gr Bullseye load lubed with Ben's Liquid Lube.
Just wondering if anyone has tried Unique?

[Hardcast416taylor]

Always thought about getting that mold, just never did due to health problems. I do know that the jacketed bullet of that weight shoots like a "house afire" in my friends mauser. Good luck with load development.Robert

[JWFilips]

Well,
I have been working with this mould and recently shot some of the plain base with my GEW98 at 50 yards with light loads of 5 gr Red Dot
Here are the results from this weekend
15 shots into about 1 1/2 inches at 50 yards open sights ( Redfield aperture receiver sights and Lyman 17 a Front aperture sight)
146370

[JWFilips]

Well this morning I decide to shoot the classic battle rifle 10 grain load of Unique using the 130 grain gas Checked boolit Lubed in Ben's red and seal coated with a tumble in BLL. Boolits sized .326"

Here is my best target from this morning ( actually the first target I shot after 2 barrel warming rounds)
6 shots into about 3/4 inches at 50 yards w / Redfield aperture receiver sights and Lyman 17a Front aperture sight (& now using the smallest Lee Shaver disk from his precision 17a aperture set)

146788