Wayne Smith
07-08-2015, 07:30 PM
I have a Herters copy of the CH swage press. I have prevailed on Dave to find some of the old blanks and now have a swage die in 401 and one in 451, but he had no base plug or nose punches. If you are not familiar with the details of this I also have a 357 die with both base plug and nose punch or former that I can send along for you to see the relationship and needed fit.
I need a .401 and .451 base plugs and nose puches for each, ideally to form WFN type noses and to form WFN-HP noses. Rick (Buckshot) had these on his desk for quite a while but told me he was missing one tool he would need to do them - I don't remember which.
Anyone interested?
I need a .401 and .451 base plugs and nose puches for each, ideally to form WFN type noses and to form WFN-HP noses. Rick (Buckshot) had these on his desk for quite a while but told me he was missing one tool he would need to do them - I don't remember which.
Anyone interested?