View Full Version : New CH4D 9mm dies
guywitha3006
07-04-2015, 12:01 AM
Hey guys,
Any chance someone has some pictures of bullets made from the CH4D 105 Dies? I am in the process of of setting mine up and there seems to be a lot of lead out the front? I just want to see if I am going in the right direction.
On a side note, I am using lee .32 caliber 93 grain boolits for cores and .475" RCE jackets.
Thanks!
goblism
07-04-2015, 12:02 AM
Hey guys,
Any chance someone has some pictures of bullets made from the CH4D 105 Dies? I am in the process of of setting mine up and there seems to be a lot of lead out the front? I just want to see if I am going in the right direction.
On a side note, I am using lee .32 caliber 93 grain boolits for cores and .475" RCE jackets.
Thanks!
Are you using the 105 or the 101 dies? I could be wrong but my understanding has been that the 105 are for lead bullets only and not for swaging into jackets.
Mike
guywitha3006
07-04-2015, 12:07 AM
101, they are the dies for use with jackets.
BT Sniper
07-04-2015, 02:27 AM
http://castboolits.gunloads.com/showthread.php?103094-Why-does-the-CH-9mm-357-have-such-a-long-ogive
This should help.
BT
guywitha3006
07-04-2015, 08:50 PM
Thanks BT, are you still offering to upgrade the metaplate and make larger HP/FP pins? I would definitely be interested.
http://castboolits.gunloads.com/showthread.php?103094-Why-does-the-CH-9mm-357-have-such-a-long-ogive
This should help.
BT
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.