PDA

View Full Version : Obsolete cartridges shotgun


pepe_elpata
07-01-2015, 01:44 PM
Who manufactures obsolete cartridges shotgun?. Nowadays.
for shotshells or slug, in 18 gauge and 30 gauge?
Thanks
bubba.50
07-01-2015, 05:50 PM
Mag-Tech makes solid brass cases for some obsolete shotgun gauges. don't know right off if they have any of the gauges you mention & don't know if anyone loads for them. luck & have a good'en, bubba.
JSnover
07-01-2015, 06:47 PM
The Old Western Scrounger used to have a good selection of obsolete ammunition.
pepe_elpata
07-02-2015, 08:16 AM
Mag-Tech makes solid brass cases for some obsolete shotgun gauges. don't know right off if they have any of the gauges you mention & don't know if anyone loads for them. luck & have a good'en, bubba.

Hello Bubba, thanks for answering.
I can not find anything on their website relating to these gauges.
I keep looking.
A greeting

pepe_elpata
pepe_elpata
07-02-2015, 08:23 AM
The Old Western Scrounger used to have a good selection of obsolete ammunition.

Hello jsnover.
I do not find anything about them.
Thank you very much and greetings

pepe_elpata
bubba.50
07-02-2015, 03:06 PM
I know it's probably nothing you want to hear but, there's a guy on gunbroker who has one 18 gauge dummy collector cartridge and one 18 gauge brass case. $25.00 buy it now for the dummy cartridge & $15.00 buy it now for the brass case. can't find anything at all on a 30 gauge.

luck to ya & have a good'en, bubba.
pepe_elpata
07-02-2015, 06:30 PM
Hello, bubba.
I have found it !! EUREKA.
gunbroker.com page and the seller is Buckstix having these prices you say.
But the pods are manufactured by Rocky Mountain Cartridge RMC and its website offers a pack of 10 units to 75 dollars.
See if I'm lucky and I can get.
30 gauge fails for later.
Best regards and thank you very much for the information.

pepe_elpata
bubba.50
07-02-2015, 07:19 PM
de nada, amigo.
Cowboy_Dan
07-02-2015, 09:23 PM
I'm not sure on the dimentions of 30 Gauge, but maybe you can make them from some type of rifle brass, like .303 British and 9.3x74R can be made into .410 Bore shells. Just something to look into.
pepe_elpata
07-03-2015, 05:17 AM
Hello Cawboy Dan:
30 gauge measurements are here. http://www.municion.org/semi/30.htm
I have no weapon to shoot them, it's just for collection.
Thanks.
bubba.50
07-03-2015, 06:24 PM
any way to translate the site to English?
Cowboy_Dan
07-04-2015, 01:06 AM
Hello Cawboy Dan:
30 gauge measurements are here. http://www.municion.org/semi/30.htm
I have no weapon to shoot them, it's just for collection.
Thanks.

In that case, my idea won't help you. You need a gun in the caliber to fully straighten out the walls. Plus the cases would have the wrong headstamp. Good luck to you.