Last Spike
10-05-2005, 09:44 PM
I’m thinking of having Mountain Molds make the following boolit mould for me:
35 cal gas checked boolit for use in 35 Remington Marlin 336C
Weight(including lube & gas check): 220 grains
Alloy: wheel weights
Bullet Design: Ogival Flat Point (OF)
As-cast Bullet Diameter: 0.359” plus/minus 0.001”
Front Band Bottom Diameter: 0.357” plus/minus 0.001”
Front Band Top diameter: 0.357” plus/minus 0.001”
Front Band Length: 0.100”
Nose Length: 0.540”
Crimp groove: 0.055” long groove
Meplat: (70%) about .251”
Base: 0.3415” stepped shank for Hornady-Gator 35 cal gas check, 3.3 gr.
Length of base: 0.100”
Groove to band length ratio: 0.8
Groove angle: 45 degrees
Number of Body Bands: 2
Number of Lube grooves: 1
Band length: 0.0727”
OAL: 0.884”
Groove c.to c. : 0.131"
Length inside case: 0.334”
Sectional density 0.244
Groove diameter 0.33”
Ogive radius 1.735”
Bearing length: 0.597”
This is to be used in my Marlin 336C in 35 Remington with 20 inch barrel and 1 in 16 inch twist as a hunting load for deer, elk, and moose within 125 yards.
Your constructive comments are most welcome. 8-)
35 cal gas checked boolit for use in 35 Remington Marlin 336C
Weight(including lube & gas check): 220 grains
Alloy: wheel weights
Bullet Design: Ogival Flat Point (OF)
As-cast Bullet Diameter: 0.359” plus/minus 0.001”
Front Band Bottom Diameter: 0.357” plus/minus 0.001”
Front Band Top diameter: 0.357” plus/minus 0.001”
Front Band Length: 0.100”
Nose Length: 0.540”
Crimp groove: 0.055” long groove
Meplat: (70%) about .251”
Base: 0.3415” stepped shank for Hornady-Gator 35 cal gas check, 3.3 gr.
Length of base: 0.100”
Groove to band length ratio: 0.8
Groove angle: 45 degrees
Number of Body Bands: 2
Number of Lube grooves: 1
Band length: 0.0727”
OAL: 0.884”
Groove c.to c. : 0.131"
Length inside case: 0.334”
Sectional density 0.244
Groove diameter 0.33”
Ogive radius 1.735”
Bearing length: 0.597”
This is to be used in my Marlin 336C in 35 Remington with 20 inch barrel and 1 in 16 inch twist as a hunting load for deer, elk, and moose within 125 yards.
Your constructive comments are most welcome. 8-)