ohland
06-08-2015, 05:29 PM
http://leeprecision.net/support/index.php?/Knowledgebase/Article/View/248/5/broken-connecting-link
Broken connecting link
Posted by on 21 October 2011 07:53 AM
The die cast connecting links on the Challenger Press, Progressive 1000 and the Turret Press have been redesigned and are now a one piece steel construction. The connecting links are installed exactly the same as the die cast links, however, there is now a top and bottom to the connecting link.
When you install it be sure to install the short legs to the press and the long legs to the toggle. If the link is installed up-side-down, it will prevent full travel of the ram. Return the broken parts to the factory for free replacement, or order the following:
(1) #TP2129 (steel connecting link)- http://leeprecision.com/connect-link.html
(2) #TP2118 (shoulder bolt)- http://leeprecision.com/shoulder-bolt.html
Broken connecting link
Posted by on 21 October 2011 07:53 AM
The die cast connecting links on the Challenger Press, Progressive 1000 and the Turret Press have been redesigned and are now a one piece steel construction. The connecting links are installed exactly the same as the die cast links, however, there is now a top and bottom to the connecting link.
When you install it be sure to install the short legs to the press and the long legs to the toggle. If the link is installed up-side-down, it will prevent full travel of the ram. Return the broken parts to the factory for free replacement, or order the following:
(1) #TP2129 (steel connecting link)- http://leeprecision.com/connect-link.html
(2) #TP2118 (shoulder bolt)- http://leeprecision.com/shoulder-bolt.html