ohland
06-04-2015, 10:02 AM
Just staggered back upstairs after measuring some 43 Spanish from Captech (via Buffalo Arms). Very consistent.
Neck thickness: .010
Head diameter: .513
Case Length: 2.243
Rim Diameter: .595
Rim Thickness: .083
I was a bit flummoxed on measuring the rim thickness at first. It has a slight raised center. After wallowing in self pity, I simply measured case length, used the depth rod on the calipers, then MATH....
So... it appears this would fit into the Lee #17 shell holder. But my RCBS #22 will never know....
Neck thickness: .010
Head diameter: .513
Case Length: 2.243
Rim Diameter: .595
Rim Thickness: .083
I was a bit flummoxed on measuring the rim thickness at first. It has a slight raised center. After wallowing in self pity, I simply measured case length, used the depth rod on the calipers, then MATH....
So... it appears this would fit into the Lee #17 shell holder. But my RCBS #22 will never know....