montanamike
05-27-2015, 12:18 AM
I was reading on here awhile back and came across a post explaining how to hp a mold. Today at work one of my appointments decided not to show up so I decided to try hping one myself. The mold is the lee 440 rf. It was the first mold I got and it's in pretty rough shape so I didn't really care if it worked or not. The first cavity drilled way off center so I decided to try the other one. It turned out as perfect as it gets. The pin I used is 1/4" stainless steel. Heres some pictures of the finished product.
http://i1142.photobucket.com/albums/n617/mtmike/IMG_2005.jpg (http://s1142.photobucket.com/user/mtmike/media/IMG_2005.jpg.html)
http://i1142.photobucket.com/albums/n617/mtmike/IMG_2010.jpg (http://s1142.photobucket.com/user/mtmike/media/IMG_2010.jpg.html)
http://i1142.photobucket.com/albums/n617/mtmike/IMG_2015.jpg (http://s1142.photobucket.com/user/mtmike/media/IMG_2015.jpg.html)
http://i1142.photobucket.com/albums/n617/mtmike/IMG_2017.jpg (http://s1142.photobucket.com/user/mtmike/media/IMG_2017.jpg.html)
http://i1142.photobucket.com/albums/n617/mtmike/IMG_2005.jpg (http://s1142.photobucket.com/user/mtmike/media/IMG_2005.jpg.html)
http://i1142.photobucket.com/albums/n617/mtmike/IMG_2010.jpg (http://s1142.photobucket.com/user/mtmike/media/IMG_2010.jpg.html)
http://i1142.photobucket.com/albums/n617/mtmike/IMG_2015.jpg (http://s1142.photobucket.com/user/mtmike/media/IMG_2015.jpg.html)
http://i1142.photobucket.com/albums/n617/mtmike/IMG_2017.jpg (http://s1142.photobucket.com/user/mtmike/media/IMG_2017.jpg.html)