Stevens 59B ejector

[tcbnick]

Ok I know this a cheap 410, but sometimes there are other reasons, and this is one of them.
All I need to do is replace the ejector, but for the life of me I can not find out how. I assume that I need to disassemble the bolt, and that is my first problem. Does anybody have a source for info that would help. I did the normal searches but to no avail.I believe that Savage made this for Stevens and there are Savage models with the same bolt, that info might be of some use. Any help and I might be able to make Grampa very happy.

Thanks Nick

[bgmkithaca]

Savage, Stevens and Springfield are all one and the same-Savage has owned the other two for a very long time.As close as I came is a parts breakdown at Gun Parts Corp. It appears that they also have the parts in stock for your project.

[mac60]

Is this any help to you?

https://books.google.com/books?id=zRJm6uF7TSIC&pg=PA434&lpg=PA434&dq=disassembly+of+stevens+59b&source=bl&ots=T1xdkN0FeZ&sig=TiHwgYpgi7r6J079ADGq6SEOEB0&hl=en&sa=X&ei=S5RiVYXCDYa0ggSlj4DwBw&ved=0CCgQ6AEwAg#v=onepage&q=disassembly%20of%20stevens%2059b&f=false

[tcbnick]

bqmkithaca Thanks for the reply.

mac60, you are the Man, that is what I needed. Thank You. I'll try to repay the help someday.

Thanks Nick

[mac60]

No problem Nick. If you take it step by step it'll probably go well for you. I'd be interested in how it turns out.