Blackmon BSSP

[just bill]

Can anyone, with one, give me the bolthole dimensions, I'm revising my bench and would like the dimensions for a space being reserved for one.

Thanks,

Bill

[xman777]

When I get home.

[just bill]

Thanks.

[Utah Shooter]

Did you get your info? I think I used 1/4 20 bolts.

[just bill]

[QUOTE=Joe Christensen;3258307]Did you get your info? I think I used 1/4 20 bolts.[/QUOTE

Not yet, I would like the dimensions between the top hole to the bottom holes. I need to cut a spacer for a 20* mount big enough for the bssp and a rock chucker to work freely side by side. I have the rock chucker but no bssp dimensions or foot print.

Thanks,
Bill

[B R Shooter]

Bill, Mine measures 5 1/2" front to back holes and 4 1/4" between the rear bolt holes. Like Joe, used 1/4-20.

I have mine mounted flat on the bench, but if you mount yours on an angle, I would like to see a pic if you can.

[just bill]

Bill, Mine measures 5 1/2" front to back holes and 4 1/4" between the rear bolt holes. Like Joe, used 1/4-20.

I have mine mounted flat on the bench, but if you mount yours on an angle, I would like to see a pic if you can.

Thanks, that's what I needed. To the drawing board.
Bill

[Utah Shooter]

Awesome. Let me know if you need any photos. I am sure you have what you need though.