357 herrett and universal

[BD2]

Hi Guys, I read somewhere in another post that an old lyman manual had a load for a 158 grain lswc with a starting load of 9 grains of unique for the 357 herrett. I was wanting to get some opinions on whether I could use universal instead since it is right under unique on the burn chart , plus I have some on hand.:wink:

[3leggedturtle]

The Contender load manual has quite a few of loads for the 357H. Even a couple of loads for RCBS WC's at over 2000fps.

[BD2]

Thanks for the heads up turtle. I'll have to put that on my must have list.