View Full Version : Lyman mold guide on a Lee pot ?
deepskyridge
05-09-2015, 10:15 AM
Anyone here install a Lyman mold guide on a Lee 20lb pot?
I have the mold guide and am looking for ideas.
Thanks
Gary
bhn22
05-09-2015, 07:34 PM
The mould guide from my Mag20 will only fit Mag20s. It mounts specifically to the legs supporting the pot itself. Lee is different. Most guys seem to build a stand that fits under the spout to serve as a guide for pots that don't come with guides.
Gary,
I just bought a Pro-Melt from swappin and selling and it came with a Lyman Mold guide on it. I'll try and remember to post a picture later this evening.
I think the guy I got it from came up with a neat Idea how to mount it.
Len H.
139461139462139463
Gary,
Here is the setup that I just bought. It appears that the guy took a 1/2" hex head bolt about 3 1/2" long, ground the head off the bolt and cut the threads
down a bit, used 2 hex nuts & drilled holes in the base.
I think you can pull this off. You should have enough room on the Lee Pot.
Len H.
deepskyridge
05-16-2015, 09:03 AM
Len, thanks for the info and pictures. That's pretty much what I am planning on doing.
I will post pictures when I get it attached to the Lee pot.
Gary
I just received the upgrade shelf kit form http://www.my2ndright.com/ and don't have a need for the Lyman mold guide and all hardware as shown above.
I wouldn't even begin to know what the mold guide is worth, any suggestions? The mold guide and the bolts, only!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.